Epson Stylus Photo RX640 series Basic Operation Manual page 5

Hide thumbs Also See for Stylus Photo RX640 series:
Table of Contents

Advertisement

3.
Slide the edge guide to the left.
4.
Load the paper against the right side of the sheet
feeder with the printable side up. The printable
side is usually whiter or glossier.
Place the stack of paper behind the tabs and make
sure it fits under the c arrow mark inside the left
edge guide. Always load paper short edge first,
even for landscape printing.
The printable side is often whiter
or brighter than the other side.
10 × 15 cm (4 × 6 in.)
photo paper
5.
Slide the edge guide lightly against the left side of
the paper.
Note:
If you are using special Epson paper, follow any instructions
that came with it. Make sure you do not load more than the
recommended number of sheets. Check the Paper Type
setting before printing to make sure it matches the type of paper
you have loaded (& page 4).
Now you are ready for copying or making prints, see
these sections:
"Copying" on page 8
"Making Prints From Your Memory Card" on
page 15
"Making Prints From Your Digital Camera" on
page 29
"Making Prints From Slides or Negatives" on
page 30
"Making Prints From Your Mobile Phone" on
page 37
5
Handling Paper

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents