Ematic eCam Series User Manual page 9

4. When charging is complete, safely disconnect the camera from the
computer:
a. In the system tray, click the green arrow (
b. Select the digital video camera from the list.
c. Wait for Windows to safely disconnect the camera from the
5. Disconnect the camera from the USB cable, if used, or detract the USB
connector by sliding the USB switch on the camera housing to the
DOWN position.
WARNING: Any USB device that stores data (e.g. flash drives, cameras, and media
players) should always be disconnected from your computer using this method to
avoid corrupting the stored data.
To charge the battery using a power adapter:
1. Power OFF the digital video camera.
2. Connect the camera via its USB connector to the power adapter.
3. Connect the power adapter to a 120V outlet.
4. Allow the battery to charge completely. During charging, the BUSY
LED light will be illuminated. When charging is complete, the BUSY
LED light will be off.
5. When charging is complete, disconnect the camera from the power
adapter.
6. Disconnect the power adapter from the USB cable.
7. Disconnect the power adapter from the 120V outlet.
eCam User Manual
devices attached to the computer.
computer. Windows will display a message when it is safe to
remove.
) to display a list of
Page 9 of 24