3.4 Recording Still Photographs
1. Ensure sufficient memory is available on the data storage device.
NOTE: When no memory is available (i.e. the SD card is full or is locked),
then the camera will not record.
WARNING: Power OFF the camera before removing or inserting the data
storage device.
2. Place the digital video camera in the STILL PHOTOGRAPH mode.
3. Use the LCD display as a viewfinder.
4. Press the LEFT ( ) or Right ( ) arrow keys to toggle between the video
sizes of HD (1280 X 720) and VGA (640 X 480).
5. Press the UP arrow key ( ) to ZOOM IN.
6. Press the DOWN arrow key ( ) to ZOOM OUT.
7. Press the shutter key (
3.5 Playing Back Recorded Data
To watch recorded video on the camera's LCD Display:
1. Place the digital video camera in the PLAYBACK mode.
2. Press the LEFT ( ) or RIGHT ( ) arrow keys to scroll through the
recorded data files.
3. When the desired file is located, press the OK/shutter key (
the video.
4. During playback, the following functions are available by pressing the
keys, as indicated:
— RIGHT arrow key
— LEFT arrow key
— OK/Shutter key
— UP arrow key
— DOWN arrow key
5. Press the MODE key to exit the PLAYBACK mode.
eCam User Manual
) to record individual still photographs.
= FAST FORWARD
= REWIND
= PAUSE/RESUME
= ZOOM IN
= ZOOM OUT
) to play
Page 14 of 24