Recording Video - Ematic eCam Series User Manual

To access the setup menu:
Mode Selector Menu
This digital video camera can record and playback both video clips and still
photographs. In the playback mode, the user can view the video or still
photographs recorded to the internal memory or to the installed data storage
device.
To select the mode:

3.3 Recording Video

1. Ensure sufficient memory is available on the data storage device.
NOTE: When no memory is available (i.e. the SD card is full or is locked),
then the camera will not record.
WARNING: Power OFF the camera before removing or inserting the data
storage device.
2. Place the digital video camera in the VIDEO RECORD mode.
3. Use the LCD display as a viewfinder.
4. Press the LEFT ( ) or Right ( ) arrow keys to toggle between the video
sizes of HD (1280 X 720) and VGA (640 X 480).
5. Press the UP arrow key ( ) to ZOOM IN.
6. Press the DOWN arrow key ( ) to ZOOM OUT.
7. To begin recording, press the shutter key (
8. To end recording, press the shutter key (
1. Power ON the digital video camera.
2. Press the Delete Key to enter the setup menu.
3. Browse the options in the setup menu using the arrow keys.
4. Select options with the Shutter/Ok Key.
1. Power ON the digital video camera to automatically enter the VIDEO
RECORD mode.
2. Press the MODE KEY to toggle the mode to STILL PHOTOGRAPH.
3. Press the MODE KEY a second time to move to PLAYBACK mode.
4. Press the MODE KEY a third time to return to the VIDEO RECORD
mode.
eCam User Manual
).
) again.
Page 13 of 24