Ematic SportsCam EVH528 User Manual

Ematic sportscam

Advertisement

Quick Links

User's Manual
Ematic SportsCam – EVH528

Advertisement

Table of Contents
loading

Summary of Contents for Ematic SportsCam EVH528

  • Page 1 User’s Manual Ematic SportsCam – EVH528...
  • Page 2 Care Please read the this user manual before using this video camera for proper and safe operation, and for optimum performance and to extend its service life.  Do not expose the video camera to sunshine directly. Aiming the lens directly into sunshine may damage the sensor.
  • Page 3: Product Introduction

     Do not touch the lens surface with fingers.  Please back up the data if the memory card inside this digital camera is used for the first time. After that, format the memory card of this video camera at one time. ...
  • Page 4: System Requirements

    30FPS).  The photo mode supports four sizes, i.e. 12M, 10M. 8M and 5M.  Support high-speed USB2.0  It supports a MicroSD card with a capacity expansion up to 32G.  This product supports video output and live playback functions. Videos can be output to high-definition TVs for playing clear and sharp pictures.
  • Page 5 Hard Disk Free space of more than 500MB Others One standard USB1.1 or USB2.0 port...
  • Page 6: Introduction To Appearance And Keypad

    Introduction to Appearance and Keypad Infrared light Camera lens Camera Busy light Busy light / charging / charging light light Screen Screen - - off light off light Screen - - off Screen light light TFT LCD switch switch...
  • Page 7 Microphone Microphone Tripod nut Tripod nut Power Power S S hutter hutter Key HDMI HDMI MicroSD MicroSD interface interface slot slot USB interface Reset key...
  • Page 8: Charge The Built-In Lithium Battery

    Usage Usage _____ 1. Charge the built-in lithium battery USB Cable USB Cable Indicator Light for charging is To charge the camera, connect it to the computer. Then, the charge indicator light (red) will be on. After the camera is fully charged, the charge indicator light will be off. In general, it can be fully charged after 2-4 hours.
  • Page 9: Use Of Memory Card

    2. Use of Memory Card 1. Push the Micro SD card into the card slot according to the concave lettering beside the slot of memory card till it is completely inserted. 2. To take out the Micro SD card, gently press the end of the memory card inward and it will pop up. MicroSD card Note: No built-in memory is available in this video camera.
  • Page 10 3. Startup/Shutdown 3.1 Startup: Press and hold the POWER button for 2 seconds. The screen of the display is activated and the camera is turned on. 3.2 Shut down: Press the POWER Key once under idle condition, and the camera will be shut down. . 3.3 Auto Screen-off: When the idle time of the camera reaches the automatic screen-off time, it will automatically turn off the screen to save power.
  • Page 11: Indicator Light

    Conversion Between Function Modes The camera has three modes: video recording mode, photo mode and playback mode. These modes can be switched over by tapping the icon in the upper left corner of the LCD display after startup. Video recording mode Photo mode Vehicle mode Playback mode...
  • Page 12: Video Recording Mode

    6. Video recording mode After turning on the DV camera, it will directly get to the video recording mode. You can start recording videos by pressing the shutter button in the preview state. To stop video recording, just press this shutter button again.
  • Page 13: Photo Mode

    7. Photo mode: After turning on the DV camera, it will directly get to the video recording mode. To switch to the photo mode, click the mode icon in the upper left corner of the LCD display. You can shoot a photo by pressing the shutter button in the preview state.
  • Page 14: Vehicle Mode

    8. Vehicle mode: 1 Mode icon: indicating currently in the vehicle mode. 2 Video size: available in FHD/HD(60FPS)/HD(30FPS)/VGA 3 Recording time: indicating the length of remaining time to be recorded. 4 Icon of setting time and date. 5 click this icon, the camera can be flipped 180 degrees to take video normally.
  • Page 15: Playback Mode

    9. Playback mode: 9.1 After turning on the camera and enabling the Preview state, press the Playback icon ( ) in the lower right corner of the LCD display to activate the menu ( ). Tap the to switch to the file list mode.
  • Page 16 Playback movie clips: In the playback mode, tap to pause. After selecting the fast playback function , click it to fast rewind. Click STOP to exit the playback mode to return to the list mode. 9.3 Playback photos: After turning on the camera and enabling the Preview state, press the Playback icon ( ) in the lower right corner of the LCD display to activate the menu ( ).
  • Page 17 9.4 File deletion: After clicking the Delete File icon , the screen will appear as shown in the right figure: Click YES to delete the current file immediately, or click NO to cancel the deletion operation.
  • Page 18 Connecting the camera to a high-definition TV: Connect the camera to a high-definition TV with a HD cable (as shown below). Then video signals from the camera will be automatically output to the high-definition TV, and you can enjoy HD videos and photos that you have recorded on the high-definition TV.
  • Page 19: Application Of Remote Control

    Application personal computer___ ____ Connect the camera to a PC The camera is provided with the plug and play function . Connect the device to the computer with USB line under turning-on state, then it will be switched into the movable hard disk mode. Icon of movable disk will appear on the window of “my computer”.
  • Page 20: Waterproof Case Using Notice

    2 Use of remote control: Using the remote control will help you start video recording, shoot photos and turn off the camera without operating the camera itself. While using the remote control, place its signal transmitter port toward the infrared signal receiver light of the camera. Then you can record videos, take photos or shut down the camera by pressing the corresponding buttons.
  • Page 21: Technical Parameters

     Remember to put the Mode Switch in your desired recording position before inserting the camera in the waterproof case. There is no external button for the Mode Switch.  After every use in salt water you will need to rinse the outside of the housing with non-salt water and dry. Not doing this can eventually cause corrosion of the hinge pin and salt buildup in the seal, which can cause failure.
  • Page 22: Standard Packaging

    Video File formats Photo JPEG Storage medium MicroSD card (Supporting up to 32GB),( without build-in flash memory) USB interface High-speed USB 2.0 interface Power Supply Built-in 3.7V rechargeable lithium Dimension (length × 74*52*33mm width × height) Weight Approx. 72g Standard packaging Camera User manual USB cable...

Table of Contents