The necessary components are now installed. Go to the section "Setting Up the Network
Interface" on page 16.
Windows XP
For Windows XP, use the following procedure to install the necessary components.
1. Click Start, highlight Control Panel, and then click Network and Internet
Connections. Select Network Connections.
2. Under LAN or High-Speed Internet, click the Local Area Connection icon.
3. Under Network Tasks, click Change settings of this connection.
4. Check if the following necessary components are in the list.
The following table lists the components required for configuring the network interface
with EpsonNet Config.
EpsonNet Config's setting screens
TCP/IP, WSD, IPP/IPPS, UPnP, Bonjour, MS
Network
The following table lists the components required for network printing.
Printing method
TCP/IP printing
Necessary components
Internet Protocol (TCP/IP)
Necessary components
Internet Protocol (TCP/IP)
15
How To