Time Menu - ProScan PS27500 User Manual

FEATURES AND MENUS
The choices for each screen are:
Not Connected Choose this if you do not have a component
connected to an antenna or video input on the back of the TV, or if
you don't want the TV to tune to a channel when the particular
component button is pressed.
Channel 2 (SAT/Cable only) Choose this if your component is
connected to the antenna jack on the back of the IV, and you
want the TV to tune to channel 2 when you press the specified
component button. Reminder; Make sure the component's Ch 2/3/
4 switch is set to channel 2.
Channel 3 Choose this if your component is connected to the
antenna jack on the back of the TV, and you want the TV to tune
to channel 3 when you pressthe specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 3.
Channel 4 Choose this if your component is connected to the
antenna jack on the back of the -IV, and you want the TV to tune
to channel 4 when you press the specified component button.
Reminder: Make sure the component's Ch 3/4 switch is set to
channel 4.
Video I Input Choose this if your component is connected to the
INPUT1 jacks on the back of the TV and you want the TV to tune
to VID1 (SVID1 if you used an S-Video cable) input channel when
you pressthe specified component button.
Video 2 Input Choose this if your component is connected to the
INPUT2 jacks on the back of the -IV and you want the TV to tune
to VID2 (SVID2 if you used an S-Video cable) input channel when
you press the specified component button.
TIME MENU
Sleep Timer Displays a control panel that lets you select the amount
of time you want to give the TV before it shuts itself off.
Schedule Displays a control panel that lets you Set up a schedule for
turning the TV on and off automatically. Make sure to turn the
schedule On. The on-screen directions guide you through the steps
needed to set the schedule.
Set Time Displays a control panel that lets you enter the current time.
The on-screen directions guide you through the steps needed to set the
time. If your TV Guide Plus+ system is setup and running then it will
automatically update your time and this option will not be •available.
View Warranty Clock Displays the number of hours the TV has been
in operation (up to 5 years) and the date the TV was first turned on.
34