Table of Contents
Advertisement
Indicator
&&°&&
MUTE
SKIP
GUIDE
_)
GO BACK
DISCMENU
INFO
MENU
CL[A_t
10 20:30
'0 sO °0
70 80,0
INPUT
SOUND,ANT
©o@
REVERS[
PLAY
FORWARD
Note: TheVCR t, DVD,VCR2, a nd
SAT*CABLE buttons also turn on most
RCA,GE,and Proscanproducts.
Tip
Toturn off aB the RCA,OE,and Proscan
components that are connected to the T_,
press ON.OFFtwice within two seconds.
Thisfeature only works with most RCA,
OE,and Proscanproducts.
The Buttons on the Remote Control
(0-9) Number
Buttons
Enter channel numbers and time settings directly through
the remote control.
To enter a one-digit
channel, enter a zero first. To enter a two-digit
channel, press the two digits. To enter
a three-digit
channel, press and hold the "I" button
until "I" and two dashes (- -) appear, then add the
second two digits. Example: to tune to channel
123, press and hold I until "I- -" appears, release the I
button
and then press 2 and 3.
Arrows
Used to point to different
items in the _[Vor DVD menu and to adjust the menu controls.
Moves
the PIP window
when no menus are on the screen. Also switches the two POP windows when no menus
are on the screen. For Zoom use, go to next page.
AUX
Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional
remote-controllable
component.
Backlight
Lights up some of the buttons in the dark.
CN + or CH -
In _V mode, scans up or down through the current channel list. Press once to change the
channel up or down; press and hold to continue
changing
channels. In DVD mode while a disc is playing,
CH+ advances to the next chapter; CH- goes to the preceding chapter.
CH+ or CH- PIP
When using PIP or POP, changes the channel in the picture window.
CLEAR
Removes any menu or display from the screen and returns you to normal viewing.
DISC MENU
In DVD mode while a disc is playing, brings up the DVD Disc menu.
DVD Turns on the DVD and puts the remote in DVD mode. Also displays current DVD status.
FORWARD
In DVD mode, advances the disc forward.
FREEZE
When watching
_[V,freezes the picture until you press another button to resume normal _[V
viewing.
Note:Do not use the Freezefeature for an extendedperiodof time. Thiscan causethe image to bepermanently imprinted
on the picture tube.Such damage is no t coveredby your warrant}4 Press any button to unfreeze the picture at any time.
GO BACK
In ]V mode, returns you to the previous channel. In DVD mode, returns to the previous screen.
GUIDE
In ]V mode, brings up the Channel Guide menu. In DVD mode, brings up DVD guide, if available.
INDICATOR
Indicates the programming
mode when programming
the remote to control components.
INFO
In TV mode, brings up _V status display; press again to clear the screen. In DVD mode, brings up
the Info Display.
INPUT
Press to toggle through the available input sources (VlD1, VID2, FRNT,CMP1, CMP2 and DVL Press
the CH+ or CH- button to resume _V viewing).
MENU
In ]V mode, brings up the _V Main menu. In DVD mode, brings up a reduced ]V Menu.
MUTE
Reduces the TV's volume to its minimum
level. Press again to restore the volume.
OK/FREEZE
When in the menu system, selects highlighted
items. When watching
]V, freezes the picture
until you press another button to resume normal _V viewing.
ON*OFF
When in IV mode, turns the _V on and off. If in another device mode (VCR, DVD, SAT*CABLE,
etc.) and programmed,
will turn the device on and off.
PAUSE
In DVD mode, pauses the disc.
PIP
Press once to bring up the small picture-in-picture
window.
Press again to bring up the picture-
outside-picture
(POP} windows. Press to remove POE (See Chapter 4 for more information
about using
PIP.)
PLAY
In DVD mode, plays the disc.
RECORD
If your _V/DVD is connected
to a VCR, records _V programs.
REVERSE
In DVD mode, goes backward on a disc.
SAT*CABLE
Puts the remote in SAT*CABLE mode and, if Autotuning
is enabled, will turn on the _ and
tune to the correct input channel.
SKIP
Press once before changing
channels and the _V will wait 30 seconds before returning
you to the
original
channel. Press repeatedly to add more time.
SOUND*ANT
In _V mode, displays the Picture and Sound preset settings at the bottom
of the TV. In DVD
mode while a disc is playing, displays the DVD Info Display with the Audio icon highlighted.
STOP
In DVD mode, stops playing the disc. Press and hold for 3 seconds to open the disc tray.
SWAP
When using PIP, swaps the main picture with the PIP window. When using POP, swaps the left
and right pictures.
14
Chapter 2
Advertisement
Table of Contents
