Table of Contents
Advertisement
Other information
TV turns
on unexpectedly
•
Wake up timer might have been aetivated, Go to page 34 for instruetions.
•
Auto on might have been activated. Go to page 34 for instructions,
•
You might have pressed CH+, CH- or INPUT on the remote accidentally.
Blank screen
•
Make sure the component connected to the IV is turned on.
•
Try another channel.
No sound,picture okay
•
Maybe the sound is muted. Try pressing the volume up button to restore sound.
•
If using S-Video or Y, PB, P R,remember to also connect the eomponent's left and right audio output jacks to the TV's L/MONO and R Audio Input jacks.
•
Make sure the INT/EXTswitch on the back of the TV is put on "INT".
•
The sound settings may not be set correctly. Go to page 33 for more information.
Can't
select
certain
channel
•
Channel may be blocked or not approved in the Parental Controls menu,
•
If using a VCR, cheek to make sure the WNCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR),
Noisy stereo reception
*
May be a weak station. UseSound menu to choose mono sound.
No
picture/blue
screen,
no sound
butTV
is on
•
Maybe the cable/air function
is set to the wrong position. Go to page 35 for detailed instructions.
•
The channel might be blank-
change channels,
•
If you're watching your VCR and it's connected with coaxial cable to the CABLE/ANTENNAjack, tune the 1V to channel 3 or 4 (whichever channel is
selected on the 3/4 switch on the back of your VCR}.Also cheek to make sure the IVNCR button on the VCR is in the correct mode (press the IVNCR
button on your VCR).
Sound okay, picture poor
•
Cheekantenna connections.Makesure all of the cablesare firmly connected to the jacks.
•
Tryadjusting sharpness function to improve weaksignals.Goto page34 for more instructions.
Volume buttons not adjusting volume louder
•
Checkto makesurevolume isn't limited by the maximumvolume feature. Go to page35 for more instructions.
Picture not moving
•
Youhaveactivated the Freeze feature by pressingOKon the remote. Pressany button to "unfreeze"the picture.
Black box appears on the screen
•
Closed-captioningmight be on. CheckClosedCaption in the Setup menu.Go to page35 for moreinstructions.
Freeze not working
•
Thefreezefeature is not availablefor Componentvideo (CMP1or CMP2)or DVIinputs.
Low battery warning appears on screen
•
Placenew batteries in remote.
42
Graphics contained
within this publication
are for representation
onl)_
Chapter 8
Advertisement
Table of Contents
