Table of Contents
Advertisement
important Information
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5. Do not use this apparatus near water.
6.
Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the manufacturer's
instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers)
that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician
for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories
specified
by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used,
use caution
when moving the cart/apparatus
combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
If an outside antenna is connected
to the W receiver, be sure the antenna system is
grounded
so as to provide some protection
against voltage surges and built up static
charges. In the U.S. Section 810-21 of the National Electrical Code and in Canada, Part
1 of the Canadian Electrical Code provides information
with respect to proper
grounding
of the antenna system. See the figure on the right for details.
Example of Antenna Grounding as per
(NEC)National Electrical Code
Toassure adequate ventilation for this product, maintain
a spacing of 4 inches from the top and sides of the "IV
receiver and 2 inches from the rear of the TVreceiver
and other surfaces.
.... /.
i ;
Advertisement
Table of Contents
