Table of Contents
Advertisement
CoHneetions
Setup
SATELLITE
i
RECEIVER
TV
IV + Satellite
Receiver + VCR
1. Connect your VCR to your IV.
A. Connect a coaxial cable to the VCR's antenna output
and to the ANTENNA/CABLE Input jack on the TV,
B, Connect the audio (white and red) cables to the VlD2 L/MONO and R Audio jacks on the back of the W and to the
Audio Output jacks on the VCR.
C. Connect the video cable to the VID2 V (Video) jack on the back of the TV and to the Video Output jack on the VCR,
2.
Make sure cable or antenna
is connected
to your VCR.
Connect
the coaxial cable from your cable outlet or antenna
to the antenna
input
on the VCR,
3.
Connect
your Satellite
Receiver
to your W.
A. Connect
the audio (white and red) cables to the VID1 L/MONO and R Audio jacks on the back of the _V and to the
Audio Output jacks on the Satellite Receiver.
B. Connect the video cable to the VIDI V (Video) jack on the back of the W and to the Video Output jack on the
Satellite Receiver.
C. If your Satellite Receiver has an S-Video jack, connect an S-Video cable (instead of the video cable in step B) to
the S-VIDEO jack on the _V and to the S-VIDEO jack on the satellite receiver.
13o to page 12
Chapter
1
Graphics contained within this publication are for representation only.
7
Advertisement
Table of Contents
