RCA D52W17YX1 User Manual page 26

Using the W's Menu System
Time Menu
SleepTimer Lets you set the IV to turn off after a given time.
Time Lets you enter the current time. If it is eight o'clock, for example, you must first enter the
number zero, then number eight. Use the OK button to choose between AM and PM.
Wake up timer Lets you set the IV to turn itself on. When you turn on Wake up timer, the
following options appear:
Wake up time Lets you set the time you want the IV to turn itself on.
Wakeupduration Lets you set how long you want the IV to stay on when it turns on.
Channelnumber Lets you select a specific channel the IV tunes to when the wake up timer
is set.
Daily Lets you choose if you want the wake up timer to turn on daily.
Parental Control Menu
The Parental Control Menu was explained in Chapter 3. Go to page 18 for more information.
PIP Menu
Display Mode
Off NO window is displayed.
PIP PIP (single) window is displayed.
POP POP (double) window is displayed.
PIP channel Allows you to choose the channel displayed in the PIP or main POP window. Scroll
through channel list as well as the VlD1, VlD2 and FRNT input channels.
PIPsize Allows you to choose having a Small, Medium or Large PIP window.
PIPposition Allows you to choose having the PIP window in the Top right, Top left, Bottom right
or Bottom left part of IV.
Note:Pipsizeandposition are not avail_Ue for POP.
Setup Menu
Channel setup
SignalType IV chooses signal type during initial setup. If you change cable after setup,
choose Cable if you are using cable or a cable box for 1V signals. Choose UHF/VHFAntenno if
you are using an off-air antenna for IV signals.
Auto channelsearch Searches for channels the signal is receiving. Go to page 12 for more
information.
Auto channel update Searches for any new channels that are not in your channel list and
adds them to the list.
List and labels Edit the channels in the list or choose labels for each channel. Go to page 12
for more information.
Preferences
Language Displaysa choice list that lets you select your preferred language for the menus:
English,Spanish or French.
Maximum volume Allows you to set how high voIume turns up when you pressthe VOL+
button. Highlight Maximum volume, then pressand hold OKto hear is the maximum
volume. Make sure the volume has not been muted or turned all the way down.
Curtain effect Revealsor hides the picture by giving it a "stage curtain" effect when the IV
is switched on or off.
Special features Auto on switches your iV on after a power outage; Auto channel tunes the
IV to the channel you specify as the Initial channel when Auto on is enabled; Auto volume
tunes the IV to the volume you set in Initial volume when Auto on is enabled.
24
Graphics contained within this publication are for representation onl)_
Chapter
4