Table of Contents
Advertisement
CoHnections
Setup
Set
the
Menu
Language
The first part of the setup allows you to select your preferred
language for the menu system.
1. Highlight
your preferred language for the menu system using the arrow buttons.
2. Press OK to select that language (the Channel Setup screen appears with Auto ehannelseereh
highlighted).
Complete Auto Channel Search
This part of the setup allows the W to search for all channels viewable through your antenna or
cable _V system. This is sometimes called auto programming.
Press OK to begin auto channel
search. When the channel search is complete, press OK to access the List & Labels screen.
Changing
Lists and Labels
The List _ Labelspart of the setup lets you edit your channel list and choose or create a personal
six-character label for each channel.
2.
3.
Note:Changing List and Labelscan be time consuming. Youcan change theseat a later time by accessingthe
Setup menu.
1. Press the left or right arrow to scroll through
the available channels and choose the channel
you want to edit.
Press the down arrow to highlight
the In channel list option. Press the left or right arrow
button
to add (the box is checked] or remove (the box is unchecked) the channel from the
list.
4.
5.
6.
Press the down arrow to highlight
the Channel label option. Press the left or right arrow
button
to scroll through the available list of 25 most common labels. The last option in the
list allows you to create your own six-character
label for the channel (the first letter of the
label is highlighted).
Press the I or 2 number button to change the first letter of the label.
Press the right arrow to highlight
the second letter, then press the I or 2 number button
to
change the second letter, etc...
When you are finished creating your label, select Go back (the Auto Convergence menu
appears).
Auto
Convergence
Your ]V's picture tubes might have been disturbed during delivery or after you moved the IV,
causing the color in your IV to be out of alignment.
The colors adjust by starting
auto
convergence.
1. Press OK to begin auto convergence.
2. When the auto convergence
is complete, the Red center convergence menu appears. The
cross in the middle of the screen should be yellow. If it is not, use the arrow buttons to move
the red cross to overlap the green cross. Press OK when adjustments
are complete.
3. The Blue center convergence menu appears with a wan cross in the middle of the screen. If
it is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK
(the lV tunes to the last available channel in the channel list).
12
Graphics contained
within this publication
are for representation
onl)_
ChaDtef
1
Advertisement
Table of Contents
