Table of Contents
Advertisement
ADVANCED
CONNECTIONS
Advanced
connections
give you better sound and video by separating
the audio and video signals and enabling
you to connect multiple
components.
This section describes the types of inputs available
on the back of your
TV and suggests ways you can use them for optimum
performance.
Once you have made your connections
you will need to program the TV to tune
to the correct Video INPUT channel in
order to see and hear audio and video
from the component. You will program
this later in the Interactive Setup.
Back ofthe
TV
The diagram
below describes each of the back panel jacks. When
connecting
A/V cables, be sure to connect corresponding
OUTPUTS and
INPUTS (Video to Video, Right Audio to Right Audio, etc.).
VIDEO and Audio Inputs
Connect any one of the following
components:
• VCR
•Intemet
Access Device
• Laserdisc Player
• DVD Player
• Satellite Receiver
To view the component
connected
to VIDEO,
use the WHO,INPUT
button
on the remote.
\
_
V_DEO
[e
VCR
CONTROL
S-_EO
T
VCR Control
Connect the GUIDE Plus+
system IR controller
for
one-button
recording
and channel tuning
from
the GUIDE Plus+ system.
S-Video
This optional
connection
can
be used for
better video
quality
picture.
Audio
Outputs
Connect to an audio receiver or
amplifier
for variable
controlled
or fixed level stereo output.
/
e
CABLE/
ANTENNA
I
Cable/Antenna
1
Takes the signal input from a cable,
cable box, or an off-air
antenna.
Can also
be used for basic component
connections.
6
Advertisement
Table of Contents
