Table of Contents
Advertisement
STEP 4: PLUG IN THE TV
Plug the end into the wall outlet,
matching
the wide blade of the plug
with the wide slot in the outlet.
Be sure to insert the plug completely.
STEP 5: PLACE BATTERIES
IN REMOTE
Remove the battery
compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
Replace the cover.
STEP 6: TURN
ON THE TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button
not only turns on the TV, but puts the remote
into TV mode, so that the buttons
on the remote
will control
TV
functions.
ON-SCREEN
PROGRAM
GUIDE
The TV is designed
to bring up the GUIDE Plus+ on-screen
program
guide when you use the TV button
on the remote to turn on the TV
(after you have set up the GUIDE Plus+ system). For more information
on
setting
up the GUIDE Plus+ system, see the next section, Interactive
Setup.
To get out of the GUIDE Plus+ System:
Press OK to exit the GUIDE Plus+ system and tune to the highlighted
channel.
Press GUIDE to exit the GUIDE Plus+ system and tune to the channel
displayed
in the View window.
Press CLEAR to exit the GUIDE Plus+ system and go to the last
channel you were watching.
STEP 7: PROGRAM
THE TV
Proceed to the next section, Interactive
Setup. The interactive
setup
routine
walks you through
the steps needed to fully configure
the TV.
The first steps ask you to select your preferred
language for the menu
system and to begin the auto channel search, which puts available
cable
TV or antenna
signals into the TV's memory.
10
Advertisement
Table of Contents
