Table of Contents
Advertisement
PIP Problems?
Make sure the remote is in the right mode.
For example, once you
turn on the VCR with the VCR1 button,
you can't SWAP the pictures
until you put the remote in TV mode. Just press the TV button.
No signal or bad reception?
Most VCRs and satellite
receivers have
an antenna
or TV button.
If your cable or off-air antenna
goes into
your VCR or satellite
receiver, then into your TV, try pressing the
antenna
or TV button
on the front of the component.
Tip: If programmed
to control
your VCR, the ANTENNA button
on
the remote acts as a TV/VCR button.
Check the connections.
PIP requires a second video source, like a
VCR or satellite
receiver, connected
to your TV with audiolvideo
cables. If you use a cable box, you may need extra equipment.
Contact your cable company
for more information.
CHANNEL
MARKER
There are several indicators
that may come up when you press the TV, INFO,
PIP or SWAP button.
This display is called the Channel Marker.
12=01 Displays the current time.
CC Displayed when Closed Captioning
is available
on the current
channel.
ESPN Displays the label assigned to the current channel.
60 Displays the current channel or input channel. If yellow,
pressing
channel up and down changes this channel.
Mute (or Stereo)
Mute is displayed when you mute the audio. Stereo
is displayed when the current
channel is broadcasting
in Stereo.
SAP Displayed when the current channel is broadcasting
SAP (Second
Audio Program)
information.
PIP59
(PIP Chan)
Displays the current PIP channel. Ifyellow,
pressing
channel up and down changes the PIP channel.
locked
Displayed when Parental Controls are locked.
Sleep Displayed when the Sleep Timer has been set.
00:00 Displayed to count down time left on the commercial
skip (SKIP)
timer.
CABLE, CABLE BOX. OR ANTENNA
VCR I
CH_
TV
To see a different picture in the PIP
window,
you must connect another video
source, like a VCR. This connection
requires audio/video
cables.
You can program the TV to tune to a
specific channel when you press the VCR1,
SAT.CABLE, DVD and VCR2 buttons.
This
is an easy way to tune the PIP window
to
the correct video input channel.
Check out the auto tuning feature in the
Interactive Setup and Using the Menus
sections.
Sample displays on a Channel Market:
46
Advertisement
Table of Contents
