Setting And Starting A Programme - AEG L87485 FL User Manual

Electrolux
Hide thumbs Also See for L87485 FL:
Table of Contents

Advertisement

5.
Measure out the detergent and the
fabric conditioner.
6.
Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.

12. SETTING AND STARTING A PROGRAMME

1.
Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
with red colour.
3.
The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the available
functions.
4.
To change the temperature and/or
the spin speed, press the related
buttons.
5.
Set the available functions.
6.
Press button
gramme. The indicator of button
is on.
The drain pump can operate for
a short time when the appliance
fills water.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
12.1 Interrupt a programme
1.
Press button
flashes.
2.
Press button
programme continues.
12.2 Cancel a programme
1.
Press button
gramme and to deactivate the appli-
ance.
flashes
4
4
to start the pro-
4
. The indicator
again. The washing
4
1
to cancel the pro-
2.
Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
12.3 Change a function
You can change only some functions be-
fore they operate.
1.
Press button
flashes.
2.
Change the function set.
4
12.4 Set the delay start
1.
Press button
til the display shows the number of
minutes or hours. The related sym-
bols comes on.
2.
Press button
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you press button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.
12.5 Cancel the delay start
1.
Press button
tor flashes.
2.
Press button
til the display shows 0'.
3.
Press button
starts.
ENGLISH
1
again to activate
. The indicator
4
5
again and again un-
4
, the appliance
4
to
. The related indica-
4
again and again un-
5
. The programme
4
17

Advertisement

Table of Contents
loading

Table of Contents