Setting And Starting A Programme - AEG L 87495 FL User Manual

5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you close
the drawer.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
with red colour.
3. The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the available
functions.
4.
To change the temperature and/or
the spin speed, press the related but-
tons.
5. Set the available functions.
6.
Press button
gramme. The indicator of button
is on.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1.
Press button
es.
flashes
4
to start the pro-
4
4 . The indicator flash-
4. To use liquid detergent, turn the flap
down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit showed in
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
2.
Press button
programme continues.
CANCEL A PROGRAMME
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
4
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1.
Press button
es.
2. Change the function set.
SET THE DELAY START
1.
Press button
the display shows the number of mi-
nutes or hours. The related symbols
comes on.
2.
Press button
the countdown of the delay start.
ENGLISH
4 again. The washing
1 to cancel the pro-
1 again to activate the
. The indicator flash-
4
5 again and again until
, the appliance starts
4
19