Setting And Starting A Programme - AEG L 87480 FL User Manual

18 www.aeg.com/au
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you close
the drawer.

SETTING AND STARTING A PROGRAMME

1. Turn the programme knob. The rela-
ted programme indicator comes on.
2.
The indicator of button
red.
3. The display shows the default tem-
perature, the spin speed and the
empty indicator bars of the available
functions.
4. To change the temperature and/or
the spin speed, press the related but-
tons.
5. Set the available functions.
6.
Press button
gramme. The indicator of button
is on.
The appliance automatically
adjusts the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1.
Press button
es.
flashes
4
to start the pro-
4
4 . The indicator flash-
4. To use liquid detergent, turn the flap
down.
With the flap in the position
DOWN:
– Do not use gelatinous or thick
liquid detergents.
– Do not put more liquid deter-
gent than the limit shown on
the flap.
– Do not set the prewash phase.
– Do not set the delay start func-
tion.
2.
Press button
programme continues.
CANCEL A PROGRAMME
1.
Press button
gramme and to deactivate the appli-
ance.
2.
Press button
appliance. Now, you can set a new
washing programme.
The appliance does not drain the
water.
4
CHANGE A FUNCTION
You can change only some functions be-
fore they operate.
1.
Press button
es.
2. Change the function set.
SET THE DELAY START
1.
Press button
display shows the number of minutes
or hours. The related symbols comes
on.
2.
Press button
the countdown of the delay start.
4 again. The washing
1 to cancel the pro-
1 again to activate the
4 . The indicator flash-
repeatedly until the
5
, the appliance starts
4