Programmes Table - Zanussi ZWQ 5100 User Manual

patible with the selected programme, the "Start/Pause"
button flashes red.
"Prewash" option
The appliance runs a prewash at 30°C max.
"Super quick" option
The washing time will be reduced depending on the pro-
gramme selected.
"Rinse plus" option
The washing machine will add one or more rinses during
the cycle. This option is recommended for people with
sensitive skin and in soft water areas.
"Delay start"
This option allows you to delay the start of a wash pro-
gramme by 3, 6 or 9 hours by pressing the "Delay start"
pushbutton.
You can change or cancel the delayed start time at any
time before you press the "Start/Pause" pushbutton by
pressing the "Delay start" pushbutton again (when all in-
dicators are off, the wash programme will start immediate-
ly).
If you have already pressed the "Start/Pause" pushbutton
and you want to change or cancel the delayed start, pro-
ceed as follows :
• To cancel the delay start and start the cycle immediate-
ly, press "Start/Pause" and then "Delay start". Press
"Start/Pause" to start the cycle.
• To change the timer delay period, you must go through
the "Stop" position
The lid will be locked during the delayed start time. If you
need to open it, you must first pause the appliance by
pressing the "Start/Pause" pushbutton. After closing the
lid again, press the "Start/Pause" pushbutton.
Start of the programme
Press the "Start/Pause" button to start the cycle. The cor-
responding light will come on green. It is normal for the

Programmes table

Programme / Type of washing
Cotton Normal (cold - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table linen,
body linen, towels.
www.zanussi.com
and reprogramme your cycle.
programme selector to remain stationary during the cycle.
The light corresponding to the current cycle is illumina-
ted.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 minutes
Press the "Start/Pause" pushbutton : the corresponding
light will flash green while the appliance is paused. The
lid can only be opened around 2 minutes after the wash-
ing machine has come to a stop. Press the "Start/Pause"
pushbutton again to continue the programme.
Modifying the programme in progress
Before making any changes to the current programme,
you need to pause the washing machine by pressing the
"Start/Pause" pushbutton. If the modification is not possi-
ble, the "Start/Pause" pushbutton flashes red for a few
seconds. If you still decide to change the programme, you
must cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn the programme
selector to the "Stop" position
End of the programme
The washing machine stops automatically, the "Start/
Pause" pushbutton goes out and the light "End of cycle"
comes on. The lid can only be opened around 2 mi-
nutes after the washing machine has come to a stop. Turn
the programme selector to the "Stop"
move washing. Unplug and close water inlet tap.
Load/Time
5,5 kg Rinse hold, Prewash, Super quick, Rinse
145-155 min plus, Delay start
.
position. Re-
Possible options
5