Programmes Table - Zanussi ZWY 1100 User Manual

Start of the programme
Press the "Start/Pause" button to start the cy-
cle. The corresponding light will come on
green. It is normal for the programme selector
to remain stationary during the cycle. The light
corresponding to the current cycle is illumina-
ted.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 mi-
nutes
Press the "Start/Pause"
corresponding light will flash green while the
appliance is paused. The lid can only be
opened around 2 minutes after the washing
machine has come to a stop. Press the "Start/
Pause" pushbutton again to continue the
programme.
Modifying the programme in progress
Stand by: once the programme has fin-
ished after a few minutes the energy sav-
ing system is enabled with the pilot lights

Programmes table

Programme / Type of washing
Cotton (cold - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table lin-
en, body linen, towels.
1)
Eco (40° - 60°) : White or colour, e.g. nor-
mally soiled work clothes, bed linen, table linen,
body linen, towels.
Synthetics (cold - 60°) : Synthetic fabrics,
body linen,fab, coloured farics, non-iron shirts,
blouses.
Delicates (30° - 40°) : For all delicate mate-
rials, for example curtains.
Wool (30° - 40°) : Machine washable wool
carrying the labels "pure new wool, machine
washable, does not shrink".
Handwash (cold - 30°) : Very delicate items
carrying the "wash by hand" label.
6
pushbutton : the
5,0 kg
5,0 kg
2,5 kg
2,5 kg
1,0 kg
1,0 kg
Before making any changes to the current pro-
gramme, you need to pause the washing ma-
chine by pressing the "Start/Pause"
button. If the modification is not possible, the
"Start/Pause" pushbutton flashes red for a
few seconds. If you still decide to change the
programme, you must cancel the current pro-
gramme (see below).
Cancelling the programme
If you want to cancel the programme, turn the
programme selector to the "Stop" position
End of the programme
The washing machine stops automatically, the
"Start/Pause" pushbutton goes out and the
light "End of cycle"
only be opened around 2 minutes after the
washing machine has come to a stop. Turn the
programme selector to the "Stop" position
Remove washing. Unplug and close water inlet
tap.
switched on. By pressing any button the appli-
ance will come out of the energy saving status.
Load
Prewash, Super quick, Rinse plus, Rinse
hold
Prewash, Rinse plus, Rinse hold
Prewash, Super quick, Rinse plus, Rinse
hold
Prewash, Super quick, Rinse plus, Rinse
hold
Rinse hold
Rinse hold
comes on. The lid can
Possible options
www.zanussi.com
push-
.
.