Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWP 581
Summary of Contents for Zanussi ZWP 581
- Page 1 User manual Washing Machine ZWP 581 ZWQ 5102 ZWQ 5103 ZWQ 5122...
-
Page 2: Table Of Contents
Contents Safety Information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Operating Problems _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Detergents and Additives _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 How to run a wash cycle? _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4... -
Page 3: Product Description
• Refer to the instructions on the label of each item be- • This appliance is not intended for use by persons (in- fore washing. cluding children) with reduced physical, sensory or mental capabilities, or lack of experience and knowl- •... -
Page 4: How To Run A Wash Cycle
Dispenser box Prewash Wash Softener (do not fill above the MAX symbol How to run a wash cycle? Using for the first time • Run an initial wash cycle at 90°C, without any washing but with detergent to clean the water •... -
Page 5: Washing Programmes
patible with the selected programme, the “Start/Pause” Press the “Start/Pause” pushbutton : the correspond- pushbutton flashes red. ing light will flash green while the appliance is paused. The lid can only be opened around 2 minutes after the “Prewash” option washing machine has come to a stop. - Page 6 Programme / Type of washing Load Available options 2,5 kg Rinse hold, Quick, Prewash, Extra rinse, De- Synthetics (30° - 60°) : Synthetic fabrics, body lay start linen, coloured fabrics, non-iron shirts, blouses. Max. spin speed: 900 rpm (850 rpm for model ZWP581) 1,0 kg Rinse hold, Prewash, Extra rinse, Delay start...
-
Page 7: Care And Cleaning
Programme / Type of washing Load Available options 5,5 kg Delay start Spin : A spin cycle from 500 to 850 rpm for mod- el ZWP581/ 1000 rpm for model ZWQ5102,ZWQ5103/ 1200 rpm for model ZWQ5122 after a Rinse hold option. 1) We recommend not to add any detergent for prewash phase. -
Page 8: Operating Problems
Operating Problems Numerous checks were carried out on your appliance be- function, please refer to the sections below before contact- fore it left the factory. However, should you notice a mal- ing the after-sales service. Problems Causes The appliance doesn’t start or •... -
Page 9: Detergents And Additives
Problems Causes The wash cycle is much too • the water inlet filters are dirty (see “Care and cleaning ”), long: • the power or water supply has been cut off, • the motor overheating detector has been activated, • the water inlet temperature is lower than usual, •... -
Page 10: Technical Specifications
Technical Specifications DIMENSIONS Height 850 mm Width 400 mm Depth 600 mm LINE VOLTAGE /FREQUENCY 230 V / 50 Hz POWER CONSUMPTION 2300 W FUSE 10 A Level of protection against ingress of solid particles and moisture IPX4 Water supply Cold water WATER PRESSURE Minimum... - Page 11 Unpacking Water supply In case of necessity move Open the water inlet tap. the inlet hose in the direc- Check there are no leaks. tion shown on picture. To The water inlet hose can make this loose the inlet not be extended. If it is too hose ring nut and position short, please contact the the inlet hose downwards...
-
Page 12: Environment Concerns
Environment concerns at your local council) for collection and recycling. When The symbol on the product or on its packaging disposing of your appliance, remove all parts which could indicates that this product may not be treated as be dangerous to others: cut off the power supply cable at household waste. - Page 16 www.zanussi.com/shop...