Programmes Table - Zanussi ZWQ 5100 User Manual

• To cancel the delay start and start the cycle immedi-
ately, press "Start/Pause" and then "Delay start". Press
"Start/Pause" to start the cycle.
• To change the timer delay period, you must go through
the "Stop" position
The lid will be locked during the delayed start time. If you
need to open it, you must first pause the appliance by
pressing the "Start/Pause" pushbutton. After closing the
lid again, press the "Start/Pause" pushbutton.
Start of the programme
Press the "Start/Pause" pushbutton to start the cycle. The
corresponding light will come on green. It is normal for
the programme selector to remain stationary during the
cycle. The light corresponding to the current cycle is il-
luminated.
+ : Prewash + Wash
+ : Rinses + Spin
: End of cycle
Interrupting a programme
Adding washing during the first 10 minutes
Press the "Start/Pause" pushbutton : the corresponding
light will flash green while the appliance is paused. The
lid can only be opened around 2 minutes after the washing
machine has come to a stop. Press the "Start/Pause"
pushbutton again to continue the programme.

Programmes table

Programme / Type of washing
Cotton Normal (cold - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table linen,
body linen, towels.
1)
Cotton Eco (40° - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table linen,
body linen, towels.
Synthetics (cold - 60°) : Synthetic fabrics, body lin-
en,fab, coloured farics, non-iron shirts, blouses.
Delicates (cold - 40°) : For all delicate materials, for
example curtains.
Wool (cold - 40°) : Machine washable wool carrying
the labels "pure new wool, machine washable, does
not shrink".
Handwash (cold - 40°) : Very delicate items carrying
the "wash by hand" label.
and reprogramme your cycle.
Modifying the programme in progress
Before making any changes to the current programme,
you need to pause the washing machine by pressing the
"Start/Pause" pushbutton. If the modification is not pos-
sible, the "Start/Pause" pushbutton flashes red for a few
seconds. If you still decide to change the programme, you
must cancel the current programme (see below).
Cancelling the programme
If you want to cancel the programme, turn the programme
selector to the "Stop" position
End of the programme
The washing machine stops automatically, the "Start/
Pause" pushbutton goes out and the light "End of cycle"
comes on. The lid can only be opened around 2 mi-
nutes after the washing machine has come to a stop. Turn
the programme selector to the "Stop" position
move washing. Unplug and close water inlet tap.
Standby mode
If the appliance is on but no commands are selected for
10 min before or after a cycle, it goes into standby mode.
All the lights go out and "Start/Pause" flashes slowly.
To exit standby mode, simply press any pushbutton or
turn the programme selector.
Load/Time
5,5 kg Rinse hold, Prewash, Super quick, Rinse
140-150 min plus, Delay start
5,5 kg Rinse hold, Prewash, Rinse plus, Delay start
145-155 min
2,5 kg Rinse hold, Prewash, Super quick, Rinse
90-100 min plus, Delay start
2,5 kg Rinse hold, Prewash, Super quick, Rinse
60-70 min plus, Delay start
1,0 kg Rinse hold, Delay start
55-65 min
1,0 kg Rinse hold, Delay start
55-65 min
.
Possible options
. Re-
5