Advertisement
10
Trouble shooting
Make sure vacuum cleaner is turned off and power cord is unplugged
Problem
Motor will not start
Vacuum does not clean
carpet or bare floor.
No suction at the end of hose. Dustbin and filter
Turbo nozzle will not turn
Vacuum is hard to push
Burning smell; brush roll will
not turn.
Cause
Power plug
Power switch
Thermal cut-off
Dustbin and filter
Air path selector
Belt
Hose
Bare floor setting
Carpet height setting
Air path selector
Hose
Rotating brush
Vacuum height setting
Belt
Belt
Solution
•
Push plug securely into outlet, Try another outlet or check
circuit breaker.
•
Step on power to turn vacuum on.
•
See above
•
Empty dustbin, clean and/or check filter.
•
Clean or replace filters regularly to maintain suction. Page 7
•
If picking up fine dust, the dust bin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow thorough the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dustbin are
installed properly.
•
Turn selector knob to 'floors'.
•
Replace a worn, cut or out of shape belt. Page 8
•
Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
•
For bare floor cleaning, turn height adjustment knob to bare
floor position, 'short pile'.
•
Turn height adjustment knob to another position.
•
Empty dust bin, clean and/or change filter.
•
Clean or replace filters regularly to maintain suction. Page 7
•
If picking up fine dust, the dust bin may not look full, but a
fine substance tends to reduce suction when it blocks air
flow thorough the filter and screen. Refer to page 7 for filter
maintenance. Make sure filter, screen and dust bin are
installed properly.
•
Turn selector knob to 'tools'.
•
Remove clogs from the hose that restrict the airflow. Make
sure hose is replaced into hose retainer. Page 8
•
Check turbo nozzle for debris. Page 9
•
If no suction at end of hose, turn selector knob to 'tools'.
•
Adjust knob to a higher position.
•
Replace a worn, cut or out of shape belt.
•
Check brush roll for debris. Page 8
•
Replace broken or out of shape belt. Page 8
Hide quick links:
Advertisement
