Trouble Shooting And Customer Information; Technical Data - Electrolux Z4009 Operating Instructions Manual

b. When fitted correctly the tab in
the top right corner of the frame
should depress a black safety
tab, allowing the dust container
to fit back into the vacuum
cleaner.
6. If either of the filters appear damaged
do not re use them.
Trouble Shooting And
Customer Information
The vacuum cleaner does not start
1. Check that the power cord is
connected to the mains.
2. Check that the plug and power cord
are not damaged.
3. Check for a faulty/blown fuse.
The vacuum cleaner stops
1. Check whether the dust container is
full. If so, empty it.
2. Is the nozzle, tube or hose blocked.
3. Are the filters blocked.
Water has entered the vacuum
cleaner
It will be necessary for the Fan Unit /
Motor to be replaced by an Authorised
Electrolux service agent. Damage to
the Fan Unit / Motor caused by the
penetration of water is not covered by
warranty.

Technical Data

Rated Voltage: 220 – 240V, 50/60Hz
Max Power (W): 2000W
8