Table of Contents
Advertisement
Here are the descriptions of every setup item:
Item
Enable Filter
Accepted IP list
IP Address
(Accepted IP list)
Deny IP list
IP Address
(Accepted IP list)
When you finish with above settings, click 'Apply' button to save changes.
Description
Check this box to enable IP address filter, uncheck
this Box to disable this function.
Here lists all IP address that can build connections
to this IP camera. If you want to remove a set of IP
address from the list, click on the IP address and
click 'Remove' button.
Input the starting and ending IP address of IP
address you wish to accept connections here. IP
camera will only accept connections established
from these IP address.
If you want to specify one IP address only, input the
same IP address in both field.
Click 'New' button to add IP address into accepted
IP list.
Here lists all IP address that cannot build
connections to this IP camera. If you want to
remove a set of IP address from the list, click on the
IP address and click 'Remove' button.
Input the starting and ending IP address of IP
address you wish to deny connections here. IP
camera will deny connections established from
these IP address.
If you want to specify one IP address only, input the
same IP address in both field.
Click 'New' button to add IP address into deny
IP list.
32
Advertisement
Table of Contents
