Table of Contents
Advertisement
5. Unplug the power then find the screws in the package, use screwdriver
to fix the sun shield on the device's main body.
6. Secure the wall mounting metal bracket on the wall then secure the
bullet camera on the bracket.
7. Repower on the camera and refer to the following procedures to access
and configure it.
8. If this IP Bullet camera is connected to a PoE switch then the device can
be powered on without use the power adapter.
Note: The IR-113E (PoE model) supports IEEE 802.3af PoE standard. It
can be powered via the Ethernet cable when connected to a PoE switch.
Note: The bracket is an optional extra.
8
Advertisement
Table of Contents
