Iii-3. Wps Settings - Edimax EW-7238RPD User Manual

III-3. WPS Settings

The WPS Settings page displays settings for WPS between your extender and a
wireless client. For WPS Setup between your extender and router/access
point, please refer back to
The wireless extender supports two types of WPS for wireless clients: PBC
(Push Button Configuration) and PIN code. For PBC you can activate WPS on
the wireless extender by clicking the "Start PBC" button on the screen.
Note:
do not push the WPS/Reset button on the extender.
PIN code setup varies slightly in that it requires you to manually enter a PIN
code into each device via the WPS Settings before activating WPS.
Note:
(above), either 2.4G or 5G Wi-Fi Protected Setup
Information will be displayed on your screen. Both are
shown below for demonstration purposes.
WPS (Wi-Fi Protected Setup) is a simple way to
establish connections between WPS compatible
devices. WPS devices feature a WPS function which can
be activated by pushing a WPS button on the device or
from within the device's firmware/configuration
interface. When WPS is activated in the correct manner
and at the correct time for two compatible devices,
they will automatically connect.
(II-2. WPS
Click the "Start PBC" button to activate WPS –
Depending on your WPS Settings selection
Setup).
29