Iii. Browser Based Configuration Interface - Edimax CV-7428nS User Manual

III. BROWSER BASED CONFIGURATION INTERFACE

Once you have setup the wireless bridge as detailed in
included QIG, you can further configure the settings of the wireless bridge
anytime using the browser based configuration interface.
Note: Before you use the wireless bridge, please make
sure your computer is set to use a dynamic IP address.
This is a simple procedure, and step by step instructions
for how to do this, can be found in
configure your computer to use a dynamic IP address.
Ensure that your wireless bridge is powered on and connected to your
computer via an Ethernet cable as explained in
Please follow the instructions appropriate for your operating system:
Windows
Open a web browser (Internet Explorer is recommended) and enter
"http://www.edimax.go" into the URL bar. You will be prompted for a
username and password, please enter the default username "admin" and the
default password "1234".
Mac:
Open a web browser and enter "http://www.edimax.go" into the URL bar. You
will be prompted for a username and password, please enter the default
username "admin" and the default password "1234".
IV-1-1. How to
II-2. iQ Setup
16
II. Quick Setup or the
steps 1 – 2.