Edimax CV-7428nS User Manual page 25

IPTV Multicast
to Unicast
Multicast Data
Rate
TX Power
Enable LED Off
Mode
Click "APPLY" to make changes take effect. The following message will appear:
Click "CONTINUE" to save the changes but not apply them yet. This allows you
to make further changes in the browser based configuration interface, before
applying them all at once.
Click "APPLY" to restart the device and implement any changes. The device will
restart itself.
different kinds of data, to give higher
priority to applications which require instant
responses. This improves the performance
of such network applications.
Enable internet TV multicast packet to
unicast.
When you disable IPTV multicast to unicast,
you can set the data rate of the multicast
packet here.
You can set the output power of the
wireless radio. Unless you're using the
wireless bridge in a very large space, you
may not require 100% output power. This
will enhance security (malicious/unknown
users in distant areas will not be able to
reach your wireless bridge).
Check this box to enable "LED Off Mode"
which allows you to turn off all LEDs, or all
LEDs except the power LED. After checking
the box, select "Turn off all LED indicators"
or "Turn off all LED indicators except the
power LED" according to your preference.
25