Edimax CV-7428nS User Manual page 9

3. The WPS function of the wireless bridge will now be active for 2 minutes.
So, within 2 minutes, please press the WPS button on the wireless
router/access point of your root network, to activate its WPS function also.
Note: Different routers/access points may require
you to press and hold the WPS button for different
lengths of time – if you are unsure, please consult
the user manual of your device.
Note: Please take care not to hold the WPS button
for too long. It is common for a WPS button to have
a secondary function as a reset button, depending
on the length of time which the button is held for.
Holding the WPS button for too long may result in
inadvertently resetting the device.
4. A WPS connection will now be established between your wireless bridge
and root network router/access point within two minutes. The WLAN LED
will stop flashing, and display on to indicate a successful connection. The
WLAN LED will remain on for 5 minutes.
Note: If the WPS function on your wireless bridge
timed out after 2 minutes, before you activated
WPS on your router/access point, then please
return to step 2 and try again.
Your wireless bridge is now configured and ready for use with your wired
network device, such as smart TV, Blu-ray player or games console. Please see
9