Iv-1-2. How To Modify The Ip Address Of Your Pc Or Macintosh; Iv-1-2-1. Windows Xp - Edimax CV-7428nS User Manual

N300 universal wi-fi bridge

Hide thumbs Also See for CV-7428nS:

Table of Contents

4. Click on "Ethernet" in the left panel and then click the drop down arrow for

the menu labeled "Configure IPv4" in the right panel. From the drop down

menu, select "Using DHCP" and then click "Apply".

IV-1-2.

How to modify the IP address of your PC or Macintosh

Please follow the instructions appropriate for your operating system. In the

following examples we use the IP address 192.168.9.20 though you can use

any IP address in the range 192.168.9.x (x = 3 – 254) in order to access the

browser based configuration interface.

Note: Please make a note of your static IP before

you change it. This is for your convenience if you

wish to modify the IP address of the wireless bridge

in future. To modify the IP address of the wireless

bridge, please refer to

IV-1-2-1.

1. Click the "Start" button (it should be located in the lower-left corner of your

computer), then click "Control Panel". Double-click the "Network and

Internet Connections" icon, click "Network Connections", and then

double-click "Local Area Connection". The "Local Area Connection Status"

window will then appear, click "Properties".

Windows XP

III-5. Administrator.

Table of Contents