2. Input "cmd", and then click "OK".
3. Input "ipconfig", then press "Enter". Use the IP address following "Default
Gateway" to access this router's web‐based configuration interface. Please note
that the IP address you find may be different from this illustrated example.
NOTE: If there is no IP address following "Default Gateway", or if the address
following "IP Address" begins with "169", please try the following procedures:
Recheck the cable connection between the computer and the router.
Go to the beginning of this chapter and recheck every step of the setup
procedure.
If both of the above fails, reset the broadband router.
2‐4 Using "iQ Setup"
This broadband router's "iQ Setup" feature allows you to set up basic parameters in a few
simple steps.
1. Click "Quick Setup" after logging in.
15