Error Indications On The Front Display - Yamaha RX-V373 Owner's Manual

The unit cannot access the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Access error
Tile unit cannot access tile iPod. Turn off tile iPod and turn it on again.
Check SP Wires The speaker cables short circuit. Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Connect error The unit has detected the iPod, but cannot access it. Turn off the iPod and then turn it on again.
Internal Error An internal error has occurred. Contact the nearest authorized Yamaha dealer or service center.
No content There are no playable files in the selected folder. Select a folder that contains files supported by the unit.
The remote control IDs of the unit and the remote control are not
RemlD Mismatch identical. Change the remote control ID of the unit or the remote control (p.65).
Unable to play The unit cannot play back the songs stored on the iPod for some Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
reason, defective.
Unknown iPod The connected iPod is not supported by the unit. Use an iPod supported by the unit (p.44).
USB Overloaded An overcurrent is flowing through the USB device. Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
APPENDIX • Error indications on the front display I En 72