Connecting To The Jacks On The Front Panel; Connecting The Fm/Am Antennas - Yamaha RX-V373 Owner's Manual

D@DD
__Playbackdevice connectionsDFM/AM antenna connections _t_ _{_
Connecting to the jacks on the front panel
Use the VIDEO AUX jacks on the front panel to temporarily connect devices such as
camcorders and portable audio players to the unit.
Before making a connection, stop playback on the device and turn down the volume on
the unit.
The unit (front)
Portable audio player
Camcorder
If you select "V-AUX" as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (VIDEO) jack, you need to connect your TV to the MONITOR OUT
(VIDEO) jack of the unit (p.22).
• You need to prepare the video/audio cables that match the output jacks on your device.
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
AM antenna 1
Assembling and connecting the AM antenna
• For details on how to connect an iPod or a USB storage device, see "Connecting an iPod" (p.44) or
"Connecting a USB storage device" (p.48).
• When "USB" is selected as the input source, video signals input to the VIDEO AUX (VIDEO) jack are output
from the MONITOR OUT (VIDEO) jack.
Hold down Insert Release
iiiiil_l,
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
PREPARATIONS • Connecting the FM/AM antennas
26