Placing Speakers - Yamaha RX-V373 Owner's Manual

Select the speaker layout for t he number ofspeakers that you are using a nd place t he speakers and subwoofer (with built-in amplifier) inyour room. This s ection describes the
representative speaker layout examples.
C_ution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 _ MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 G.
Front (L) _ • • • •
Produce front right/left channel sounds (stereo sounds).
Front (R) _ • • • •
Center _ Produces center channel sounds (such as movie dialogue and vocals). • •
Surround (L) _ • •
Produce surround righ|/lefl channel sounds.
Surround (R) _ • •
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
Subwoofer _ This channel is counted as "0.1". • • • •
PREPARATIONS • Placing speakers I En 12