Whirlpool Duet YGEW9200LQ2 Use & Care Manual page 14

Super Delicate
Use this cycle to get Extra Low heat to gently dry items such as
lingerie, exercise wear, or sheer curtains.
Automatic Preset Cycle Settings
Automatic Cycles Temp. Time*
Load Type (Minutes)
HEAVY DUTY High 40
Heavyweight, towels
NORMAL Medium 34
Corduroys, work clothes
CASUAL Medium 36
Permanent press, synthetics
DELICATE Low 28
Lingerie, blouses, washable
woolens
SUPER DELICATE Extra Low 22
Exercise wear, sheer curtains,
lace
*Estimated Time with Dryness Level (medium) setting.
Use Manual Cycles to select a specific amount of drying time and
a drying temperature. When a Manual Cycle is selected, the
ESTIMATED TIME REMAINING display shows the actual time
remaining in your cycle. You can change the actual time in the
cycle by pressing MORE TIME or LESS TIME.
Timed Dry
Use this cycle to complete drying if items are still damp after an
Automatic Cycle. Timed Dry is also useful for drying heavyweight
and bulky items, such as bedspreads and work clothes.
Touch Up
Use this setting to remove wrinkles from items, such as clothes
packed in a suitcase or items wrinkled from being left in the dryer
too long.
Quick Dry
Use this cycle for drying small loads or loads that need a short
drying time.
Manual Preset Cycle Settings
Manual Cycles Temp. Default Time
Load Type (Minutes)
TIMED DRY High 40
Heavyweight, bulk,
bedspreads, work clothes
TOUCH UP Medium 20
Remove wrinkles
QUICK DRY High 27
Small loads
WRINKLE SHIELD
TM
Feature
When you are unable to remove a load of clothes from the dryer
as soon as it stops, wrinkles can form. The WRINKLE SHIELD
TM
feature periodically tumbles, rearranges and fluffs the load to
avoid wrinkles.
• Press the WRINKLE SHIELD
TM
feature to get up to
120 minutes of heat-free, periodic tumbling at the end of a
cycle.
• Stop at any time by pressing the WRINKLE SHIELD
TM
feature
or opening the dryer door.
For the Casual Cycle, the WRINKLE SHIELD
TM
feature is
preset to "On." The other Automatic Cycles will retain the
WRINKLE SHIELD
TM
feature setting. (For example, if you
select the WRINKLE SHIELD
TM
feature in the Normal cycle,
the WRINKLE SHIELD
TM
feature will be on the next time you
select the Normal cycle.)
NOTE: If you do not select the WRINKLE SHIELD
TM
feature, the
dryer stops after the cool down period.
Temperature
Temperature settings are used with the Manual Cycles. Press
TEMPERATURE until the desired temperature setting glows.
Temperature settings cannot be used with the Automatic Cycles.
0 High
0 Me_um
0 Low
0 _traLow
0 Air Only
_mpemtum
_enuGI Cyc_s on_
14