Timed Cooking (On Some Models) - Whirlpool SF380LEPQ3 Use & Care Manual

To Disable Automatic Warm Hold:
Press and hold WARM for 5 seconds. "Off" will appear in the 4-
digit display. Repeat to turn back on.
When using the Automatic Warm Hold Feature, cook times may
need to be adjusted accordingly so that foods do not become
overcooked and dry.
To Use Manual Warm Hold Feature:
1. Press WARM.
2. Set the temperature (optional).
Press the TEMP "up" or "down" arrow pad to raise or lower
the temperature in 5°F (3°C) amounts to set a temperature
other than 150°F (66°C), The warm range is 100°F-200°F
(38°C-930C).
3. Press START or START/ENTER.
4. Press CANCEL or OFF/CANCEL when finished.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Timed Cooking allows the oven to be set to turn on at a certain
time of day, cook for a set length of time, and/or shut off
automatically. Delay start should not be used for food such as
breads and cakes because they may not bake properly.
Style 1 - Series Electronic Controls
(see "Electronic Oven Controls" section)
To Set a Timed Cook:
1. Press BAKE (optional).
2. Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press STOP TIME,
4.
5.
Press the HR and MIN "up" or "down" arrow pads to enter
the desired time to end cooking.
Press START. The display will count down the time.
When the time ends, the oven will shut off automatically and
"End" will appear on the display. End-of-cycle tones will
sound, then, if enabled, reminder tones will sound every
minute.
6. Open and close the oven door to clear the display and/or
stop reminder tones.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
f. Press desired cook function.
2. Press the TEMP "up" or "down" arrow pads to enter a
temperature other than the one displayed.
3. Press START TIME or DELAY START TIME.
4. Press the HR and MIN "up" or "down" arrow pads to enter
the time of day to start.
5. Press STOP TIME (optional).
6. If STOP TIME has been pressed, press the HR and MIN "up"
or "down" arrow pads to enter the desired time to end
cooking.
Press START. "DELAY" will appear on the display.
When the start time is reached, the oven will automatically
turn on. When the stop time is reached (if programmed), the
oven will shut off automatically and "End" will appear on the
display. End-of-cycle tones will sound, then, if on, reminder
tones will sound every minute.
8. Open and close the oven door to clear the display and/or
stop reminder tones.
Style 2 - Series Electronic Oven Control
(see "Electronic Oven Controls" section)
To Set a Timed Cook:
1. Press BAKE. The bake indicator light will light up.
2. Set the temperature (optional).
3. Press the TEMP/TIME "up" or "down" arrow pad to enter a
temperature other than the one displayed,
4. Press COOK TIME. The cook time oven indicator light will
light up,
5. Press TEMP/TIME "up" or "down" arrow pad to enter the
length of time to cook.
6. Press START/ENTER. The display will count down the time.
When the time ends, the oven will shut off automatically and
"End" will appear on the display.
7. Press CANCEL or OFF/CANCEL or open the oven door to
clear the display.
To Set a Delayed Timed Cook:
Before setting, make sure the clock is set to the correct time of
day. See "Clock" section.
1. Press BAKE,
2. Set the temperature (optional).
3. Press the TEMP/TIME "up" or "down" arrow pad to enter a
temperature other than the one displayed,
4. Press COOK TIME. The cook time oven indicator light will
light up.
5. Press the TEMP/TIME "up" or "down" arrow pad to enter the
length of time to cook.
6. Press START TIME. The start time/delay oven indicator light
will light up.
7. Press the TEMP/TIME "up" or "down" arrow pad to enter the
time of day to start,
8. Press START/ENTER.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed anytime after pressing START/ENTER by repeating
steps 1-7. When the set cook time ends, the oven will shut off
automatically and "End" will appear on the display.
9. Press CANCEL or OFF/CANCEL or open the oven door to
clear the display.
Sequence Programming allows you to program up to 4 cooking
functions at one time. Other oven functions, such as the Timer
and Warming Drawer, may be used when a sequenced Program
is running.
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the FIRST/NEXT STEP pad is pressed, 3 tones will
sound prompting you to enter a stop time.
12