Table of Contents
Advertisement
To reinstall
shelf:
1.
Hold shelf at front and back.
2. Tilt front of shelf up to a 45" angle to track.
3. Insert both rear shelf slides into upper channel
of track.
4. Lower front of shelf to a level position.
NOTE:
Make sure both rear shelf slides are securely
in the track before letting go of shelf.
Upper channel
. of track
Insert rear shelf
slides Into
upper channel
of track.
Removing
the meat drawer
and cover
To remove the meat drawer:
1.
Slide meat drawer out to the stop.
2. Lift front of meat drawer and slide meat drawer out
the rest of the wiy.
3. Replace in reverse order.
To adjust the cover position:
1.
Tilt front of cover up.
2. Lift back of cover.
3. Pull cover straight out.
To replace the cover:
1.
Guide the cover's rear hooks into the slots in the
shelf supports on cabinet wall.
II
Pull out to the stop, lift the front, and pull again.
2. Tilt cover up at front until the hooks drop into slots.
3. Lower front of cover to a level position.
11
Advertisement
Table of Contents
