Direct Button Operation; Changing Channels; Changing Volume; Mute - Sharp Aquos LC-46SE94U Operation Manual

Direct Button Operation
OQQ
®@®
'v
I REEZE MENU
® d:::E::b o
C®9
FAVORITEOH
®®@@
REC SOP OPrlO_ _vO_m_
CDCD C3
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP.
• The remaining time displays when the sleep timer has been set.
• Each time you press SLEEP, the remaining time switches
as shown below.
Off,130,_, 60 _ 90 _ 120
t I
• When set, the time automatically starts counting down.
• If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• Five minutes before the time expires, the remaining time
displays every minute.
You can change channels by pressing CH/VV or 0-9,
• (DOT).
Examples:
To select a 1 or 2-digit channel number (e, g,, Channel 5}:
Press 5 ENT.
To select a 3-digit channel number (e. g., Channel 115}:
Press 1 _ 1 _ 5_ ENT.
To select a 4-digit channel number (e. g., Channel 22.1}:
Press 2 2, (DOT} 1 _ENT.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
• When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
• If you push "0" by itself, nothing will happen.
• Complete the above steps within a few seconds.
• When you enter 0-9 and • (DOT), channel selection will be
made if there is no operation within a few seconds.
You can change the volume by pressing VOL+/- on
the TV or on the remote control unit.
• To increasethe volume, press VOL +.
• To decrease the volume, pressVOL-.
Audio status
• Select "Off" by pressing SLEEP to cancel the sleep timer.
• The TV will enter standby when the remaining time reaches zero.
• When the sleep timer is set, its indicator on the TV lights red.
Press FLASHBACK to switch to the previously tuned
channel.
• Press FLASHBACK againto switch back to the currently
tuned channel.
,, FLASHBACK will not work if no channel has been changed
after the TV is turned on.
The surround function produces Surround effect from
the speakers. Each time you press SURROUND, the
mode changes between On and Off.
On: Makes it possibleto enjoy natural, realisticsurround
sound.
Off: O utputs thenorrnai sound.
® You can have the same settings by choosing "Surround" on
the menu items. (See page 23.)
Allows you to capture and freeze a moving image that
you are watching.
Press FREEZE.
• A moving image is captured.
,, Press FREEZE again to cancel the function.
,, When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
• See page 29 for details on the Output Select function.
Mutes the current sound output.
Press MUTE.
,, "E_" will be displayed on the screen for 30 minutes,and
the sound is silenced.
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
- Mute will be canceled if you press VOL +/- or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
• When this function is not available, "No displaying still
image available." will display.
• The still image automatically goes out after 30 minutes.
• If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
eanceled and a V-CHIP BLOCK message will appear.
To view external source images, select the input source
using INPUT on the remote control unit or on the TV.
1 Press INPUT,
• A list of selectablesources appears.
2 Press INPUT again or press A/Y to select the
input source.
• An imagefrom the selectedsource automaticallydisplays.
• Each time INPUT is pressed, the input source toggles.
• Ifthe corresponding i nputis not pluggedin,you cannotchange
the input.Besureto connectthe equipment b eforehand.
• See pages 13 and 14 for external equipment connection.
(D- 16