Direct Button Operation; Changing Channels - Sharp AQUOS LC-70LE660U Operation Manual

Direct Button Operation

Changing Channels

You can change channels in several ways.
Method 1
Using CH / on the remote control unit or on the TV.
Method 2
Using remote control buttons 0-9, • (DOT).
Examples:
To select a 1 or 2-digit channel number (e. g., Channel
5):
Press 5 ENTER
To select a 3-digit channel number (e. g., Channel
115):
Press 1 1 5 ENTER
To select a 4-digit channel number (e. g., Channel
22.1):
Press 2 2 • (DOT) 1 ENTER
ENG 3-1
NOTE
When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made
if there is no operation within a few seconds.
If you push "0" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and • (DOT), channel selection will
be made if there is no operation within a few seconds.