Sharp Aquos LC-46SE94U Operation Manual page 9

QUICK REFERENCE
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
t Open the battery cover.
2 Insert two "AAA" size batteries
(supplied with the product).
PBce the batteries wkh their termhlab
corresponding to the (+) and ( )
indbations in the battery compartment.
3 Close the battery cover.
Improper use of batterbs can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
bakage in old batteries.
Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause
a rash. if you find any chemical leakage, wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
If you will not be using the remote control unit for an extended period of time, remove batteries from it.
__ 17" (5 m}
Remote control sensor
F_(--) 0 POWER SLKEPo 0 OPC 10
/ 80o_
30 o __,__ 30 o
iMPORTANT:
The POWER indicator on the AQUOS television should light BLUE indicating you have
power to the AQUOS television.
If the POWER indicator on the AQUOS television still does not light up, press TV POWER
on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Q-8