Digital Setup Menu; Audio Setup; Identification; Software Update - Sharp Aquos LC-46SE94U Operation Manual
Hide thumbs
Also See for Aquos LC-46SE94U:
- Service manual (124 pages) ,
- Operation manual (65 pages) ,
- User manual (32 pages)
Table of Contents
Advertisement
On-Screen Display Menu
D
e
_
=
$
=
This setting allows you to optimize the settings of
Digital broadcasting.
Example
[_i_
Digital setup
]
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the TV.
To check for the availability of a software update, visit
www.sharpusa.com.
If you have any questions, please
call 1-800-BE-SHARP
(800-237-4277).
°°°/
®@®
®@®
Q@@
FREEZE
MENU
o
@
¢
g
FAVORITECH
®®©®
1 Press MENU to display the MENU screen, and then
press _/1_ to select "Digital Setup".
2 Press A/T
to select a specific adjustment item,
and then press ENTER.
3 Press A/T
(or _/_)
to select the desired setting,
and then press ENTER.
4 Press MENU to exit.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected to the DIGITAL AUDIO OUTPUT terminal
on the TV. Please select an audio output format
compatible with the audio format of the program you
are watching and the equipment connected.
PCM: The optical output terminal outputs audio signal
inPCM form. If your digital audio system does not
support Dolby Digital,select "PCM".
Dolby Digital: The optical output terminal outputs audio
signal inDolby Digitalform. it reproduces sound from
surround program of digital.
The current version of the TV software is displayed.
® Do not remove the USB memory
device or unplug the
AO cord while the software
is being updated,
® Be sure to properly
follow the whole procedure
described
below, step by step. Otherwise,
for
example,
the iV cannot
read the data in the USB
memory
device and software
updating
will fail,
1
Insert the USB memory
device with the update
file
into the SERVICE terminal
on the TV.
2
3
Press MENU to display the MENU screen, and
then press _/_
to select "Digital Setup".
Press A/Y
to select "Software Update", and then
press ENTER.
,, If you havealreadyset the Secret No., go to step 4.
!_}
Digital Setup
I
Software
Update
4
Input the 4-digit secret number by using 0-9.
I _]
Digital Setup
I
(D- 31
Advertisement
Table of Contents
