Schwinn IC PRO Owner's Manual page 10

Operation
Dismounting the unit
WARNING! The flywheel momentum of the Schwinn ® IC Bike will keep the pedals turning even after the rider stops
pedaling or the rider's feet slip off. B0 NOT ATTEMPT TO BISMOUNT THE BIKE OR REMOVE YOUR FEETFROM
THE PEBALS UNTIL BOTH THE PEBALS ANB THE FLYWHEEL HAVE COMPLETELYSTOPPEB. Failure to follow these
instructions may lead to loss of control and serious personal injury.
There are four ways to stop the Schwinn ® IC Bike pedals.
1. Pedal slower until you come to a complete stop.
2. Increase the resistance by turning the resistance adjustment control clockwise until you come to a complete stop.
3. Engage emergency brake by simply pressing B0WN firmly on the red brake lever that extends from the resistance
adjustment knob. Continue applying pressure until the wheel has come to a complete stop.
NOTE: The Schwinn ® Smart Release
TM
system feature is standard only on the Schwinn ® IC Elite
TM.
Please verify that your
exercise bike has this feature before utilizing stopping method #4.
4. Apply back pressure to the pedals and the Smart Release
TM
system will activate. Continue applying pressure until both
the pedals and the flywheel come to a complete stop.
10
Owner's Manual