Resetting The "Iv; Care And Cleaning; Helpful Hints-Problems/Solutions - Sanyo AVM-3660G Owner's Manual

RESET TING THE TV
Press the RESET key to automatically reset the television to factory settings. These features will automatically reset:
• Picture/Sound Adjustments: Color, Tint, Contrast, Brightness, Sharpness, Color Enhancer,
Bass, and Treble
• Channel Memory
• Audio to Stereo
• Initial Channel
• Caption to OFF
• V-Guide to OFF
• Language to English
• Clock and Sleep Timer (if previously set)
If desired, personal settings can be made again using the menu options.
CARE AND CLEANING
The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays,
cleaning agents, solvents and polishes will cause permanent damage to the fine surface.
1. Unplug the power cord before cleaning the television.
2. Clean the screen and cabinet with a soft dry cloth.
Note: NEVER spray liquids on the screen because they can run
down and drip onto the chassis. This may cause component
failure not covered under Warranty.
HELPFUL HINTS - PROBLEMS/SOLUTIONS
BEFORE REQUESTING SERVICE CHECK THE FOLLOWING CHART.
Problem: Check these Conditions: Try these Solutions:
TV turns off • Check signal (Cable/Ant.) connection. • Press POWER key.
automatically. • Power surge protection feature. • Sleep "Nmermay have been set.
• Unplug "IV momentarily.
No picture,
poor picture.
• Check antenna connections.
• May be station trouble.
• Brightness or Contrast misadjusted.
• Possible interference from household
appliance.
Black box on screen. • Caption Text Mode without display
information.
Poor color or
no color.
• Check if program is in color.
• Check antenna connections.
• Color or'nnt misadjusted.
• May be station trouble.
• Adjust antenna.
• Try a different channel.
• Press RESET key.
• Press RESET key.
• Switch OFF Captions (see page 16).
• Try a different channel.
• Adjust antenna.
• Press RESET key.
(Continued onpage 1&)