Table of Contents
Advertisement
i QuickTips
! • If Caption Text mode
is selected and no
captioned text is
broadcasted,
a black
box may appear and
remain on the TV
screen.
To remove this black
box, set captioning to
any mode other than
Textl or Text2 or
press the RESET key i
to cancel captioning
i
and customized
i
settings,
i
• When captioning
:
is turned ot_ the
channel display will
i
not stay on the screen, i
For these displays
i
to stay on the
screen you must set
i
Captioning to OFF.
CLOSED-CAPTIONING
[]
Captioning is textual information transmitted along with the picture and sound so it can be
displayed on the TV screen. Because different types of captions can be transmitted with the
TV signal, separate captioning modes are provided. The captioning modes recognized by this
model are: Captionl,
Caption2, Textl, and Text2. Local broadcasters decide which caption
signals to transmit. They may not choose to provide captions or may provide captions in one
or all of the available modes.
Captionl:
This is the main mode used for program captioning (words match the program you
are watching). Almost all broadcasters will use Captionl
to transmit program captions. These
captions are generally one or two lines.
Caption2:
This is an alternative
mode for program captioning.
Caption2 may be used by the broadcaster to provide captions in
another language, such as, Spanish or French.
Textl: This mode is used to display large amounts of text. This text
will appear within a black box that may be nearly as large as the TV
screen. Text displayed in this manner does not generally relate to
the program. These captions
may be used by broadcasters
to
provide weather reports, community
bulletins, stock quotes, etc.
Text2: This is an alternative mode used to display large amounts of
text. The same typos of information displayed in Textl can be
displayed in Text2.
Quikeap:
Qnikcap allows captions to toggle on and off with the
MUTE function. For example,
the phone rings; you press the
MUTE key on the remote control to block the TV sound; the cap-
tions display automatically.
When you finish your conversation
and press the MUTE key again to restore the sound, the captions
will disappear.
Quikcap
displays program
captions
in the Captionl
mode.
SE'FrlNG CAPTIONS
1. Press the CAPTION key on the remote control.
2. Use the 0 key to select OFF,Caption1, Caption2,
Text1, Text2, or Quikeap.
Caption1/Caption2
Textl/Text2
SETTING
THE SLEEP
TIMER
The Sleep Timer will switch off the TV automatically.
1. Press the SLEEP key.
2, Use the 0 key to select the desired time
(from 30 minutes up to 3 hours).
Note:
The Sleep Timer cancels when the TV is turned off
or if a power failure occurs.
o
I
Advertisement
Table of Contents
