Table of Contents
Advertisement
UNIVERSAL REMOTE CONTROL KEYS
Q--
Point towards TV
m
GUIDE
/ _
_ _
-0
-@
@
!)Mode
Keys --Use these keys to programthe remote
control and to select the operating mode (VCR, TV,
Cable, or SAT/A UX [satellite/auxiliary]).
(_ Video/TV.VCR
the
and Satellite
Key--In
TV
modes, this key selects the program source to display
on the screen (TV signal or signal from equipment
connected to the A / V jacks). In the VCR mode, this
key functions as a VCR's TV/VCR key. This key has
no function in the Cable mode.
(_) Number Keys--Use
these keys to directly select chan-
nels on your VCR, TV, Cable Converter
Box, or
Satellite Receiver. Two keys must be pressed to select
a channel. Example: Press 0 then 6 to select channel 6.
For cable channels 100 through 125, press and hold the
1 key until C¶--
appears. Then press the other two
numbers.
(_) Caption Key (See page 16.)
(_)V-Guide
Key (See pages 14 ~ 15.)
_)Menu/Guide
Key--Use
this key with the
and [_/[_ keys to navigate and adjust features of the
on-screen menu system (see pages 10 ~ 12). Use it to
display the Satellite Guide in the SAT/AUX mode.
(Z) Channel Scanning (CH _3/_)
and
Volume (VOL [_/[_ ) Keys--Press
to scan through
the channels in memory and to adjust the volume. In
the SAT/AUX mode, these keys move the cursor.
(_)Mute
Key_Press
once to turn off the volume. Press
again to restore.
Note: When using the audio out jacks this key will
not mute the sound.
(_) VCR Keys
These keys control the VCR's Fast Forward (t._.),
Rewind (.1.t), Play ( • ), Record (Rec), Stop (•),
Tracking (-/+),
and Pause functions.
(_Reset
Key--Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and dear all customized settings (see
page 17). It has no function in other modes.
(_Sleep
Key--Use
this key with the "0" key to set the
Sleep Timer on the TV (see page 16).
_Enter
Key--Satellite
operation only.
(_Recall
Key_Select
a channel then select another
channel using the number keys. Press Recall to
switch between the channels.
(_Display
Key--Press
once to display the TV channel
number. Press twice to display the channel number
continuously. Press again to remove the display.
(_Light
Key--Press to bacldight the keypad. Keys will
remain lit fora few seconds afterreleasing the key.
Advertisement
Table of Contents
