Adjusting The Picture - Sanyo DS25230 Owner's Manual

ADJUSTING THE PICTURE
Your TV is designed with an on-screen control system for adjusting the picture
quality. Use the Menu Contro/keys, on the Remote Control, to easily adjust the
picture to your personal preference. The on-screen displays will remain for a
few seconds after any adjustments are made.
AUTO KEY OPERATION
Use the Auto key to switch on and off
the automatic picture control system.
If "AUTO ON" is selected, the color,
tint, contrast, brightness and sharp-
ness levels will reset to the factory
settings automatically.
If "AUTO OFF" is selected, the picture
control levels will adjust to the pre-
vious manual settings.
AUTO ON
i
AUTOMATIC PICTURE
CONTROL DISPLAY
MANUAL ADJUSTMENTS
These adjustments are not required if
the picture is satisfactory.
Press and release the Digicon key
once. The Adjustment Display for
a picture control level will appear
on the screen.
Continue to press and release the
Digicon key until the desired
control appears on the screen.
Use the - and + keys to make
adjustments. Refer to the picture
control adjustment chart below.
!
COLOR
TINT
CONT
BRIGHT
SHARP
!1111" ....
I
CONTROL LEVEL DISPLAY
PICTURE CONTROL ADJUSTMENT
COLOR
TINT
CONT
BRIGHT
SHARP
To adjust color intensity
To adjust flesh tone tints
To adjust picture contrast
To adjust picture brightness
To adjust picture detail
16
- KEY
Lighten
Greenish
Lighter
Darker
Softer
I + KEY
Deepen
Purplish
Deeper
Brighter
Crisper