Dnr; Sound Control Adjustment; Selecting Stereo/Second Audio Program (Sap); Selecting The Audio Language - Sansui HDLCD3700C Owner's Manual

6
7
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
Press EXIT to return to the normal screen.
NOTE:
• If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
• The PC settings are not effective for other input
modes.
DNR
DNR (Digital Noise Reduction) can reduce
the roughness of the picture. (This function is
available only for analog broadcast.)
Press MENU.Then • or • to select
press
"Picture", then press • or ENTER.
Press • or • to select"DNR". Press < or _ to
select "On" or "Off".
Press EXIT to return to the normal screen.
Sound control
adjustment
Press MENU.Then • or • to select"Audio",
press
then press _ or ENTER.
Press • or • to select the item want to
you
adjust.
3
Bass: Press • or • to adjust the bass sound.
Treble: Press • or • to adjust the treble sound.
Balance: Press • or • to obtain an equal sound
level from both speakers.
• Press • or • to change the adjusting item.
After you desired setting, press EXIT to return to
the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word "Stereo" or "SAP" displays on-screen
every time you press DISPLAY.
1
2
Press MENU. Then press • or • to select"Audio",
then press _ or ENTER.
Press • or • to select"MTS", then press • or
to select "Stereo".
Press EXIT to return to the normal screen.
NOTE:
• Generally you can leave your TV in stereo
mode because the TV automatically outputs
the type of sound being broadcast (stereo or
mono).
• If the stereo sound is noisy, select "Mono" to
reduce the noise.
To listen to a second audio program (SAP)
Press • or • to select "SAP" in step 2 above. The
TV speakers will output the second audio program
instead of normal audio.
Selecting the audio
language
When two or more audio languages are included
in a digital signal, you can select one of the audio
language.
Press MENU.Then press • or • to select"Audio",
2
3
then press _ or ENTER.
Press • or • to select"Audio Language", then
press • or ENTER to display the Audio Language
menu.
Press •/• or Number buttons (0-6) to select
your desired language.
Press EXIT to return to the normal screen.
25