Table of Contents
Advertisement
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components to the LCD TV is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate
your particular assortment of components. The diagrams are intended to show component video and audio
interconnections
only.
To connect
the LCD TV to a VCR
Left side of the LCD TV
I
To AV1 VIDEO/AUDIO (L/R) IN
J(_ _
(_'_
°_/
Audio/Video cord
('-?) ('_'_1_
_
(not supplied)
_-_1
_
_
I
To AV2 VIDEO/AUDIO
(L!R) IN
I
To Audio/Video OUT
To connect
the LCD TV to a VCR with an S-Video
cord
If you connect a VCR with a S-Video cord to the S-VIDEO IN jack on the LCD TV, you must also connect the
audio cords to the AV1 AUDIO(L!R) IN jacks. The S-Video cord only carries the video signal. The audio signal is
separate.
Rear of the LCD TV
©1
©©©
To S-VIDEO IN
To S-Video OUT
S-Video cord (not supplied)
Audio cord (not supplied)
J,
I To AV1 AUDIO (L!R) IN
To Audio OUT
NOTE:
• When the S-Video cord and the video cord are connected to each jack at the same time, the S-Video cord
takes precedence over the video cord.
12
Advertisement
Table of Contents
